17979 State Route 536
Mount Vernon, WA 98273
and like us
Adding Multi-Wall polycarbonate to your wood framework is easier when using these special pieces to hold the panels in place. The Caps are made of a tough, sunlight resistant polycarbonate, and are weatherproof and maintenance-free.
Use End Caps on the top and bottom of Multi-Wall polycarbonate to close the channels. This keeps out dirt and insects. Also use End Caps on the outside edge of corner panels. Channel is approx. 5/8" deep.
The Joiner Cap is used to connect Multi-Wall polycarbonate over studs and rafters. Joiner cap is approx. 2" wide.
Use Gasket Washers #1436 on Washer Head Screws where fastening the center of panels to support blocking.
Builder's Notes: Drill Caps (Base) every 12" for Washer Head Screws. Caps are easily cut to length with a hacksaw.
4 ft, 6 ft and 8 ft lengths, add $20.00 per order for "oversize" shipping.
See Shipping Note to left.
us or Call us at 1-800-322-4707
Retail Store Hours: 9am - 4pm Mon-Fri, Sat 9am - 3pm PST
GREENHOUSES | ACCESSORIES | CHARLEY'S
TIPS | CUSTOMER
SUPPORT | SITE
MAP | HOME